Monday, September 21, 2009

Beyer Dynamic m160

Just figured I would rave a little bit about my m160's. Holy crap! these are my favorite mics right now. It took some settling to realize that there are the best mics I own. used them on many sessions on; overheads, guitar amps, acoustic guitar, trumpet, backup vocals and percussion. They are hyper-cardioid dual ribbon mics which means they have excellent rear rejection - and because they are ribbon mics they have pretty low output and need a clean high gain preamp. (I've never run out of gain even on super quiet acoustic sources)

I read somebody's blog saying it was the most effortless acoustic guitar sound he ever got. I can totally understand this. I just put an m160 pointing at the sound hole placed at around the 12th fret and hit record. Done. i've fumbled with stereo condensers for too long and this is too damn easy and reliable.

Tuesday, September 15, 2009

This Is Your Brain On Music by Daniel J. Levitin



My friend Andrea gave me this to read. It's currently blowing my mind.

http://www.yourbrainonmusic.com/

Tuesday, September 1, 2009

Red Book CD Master Format from Toast Titanium

Some vital info for setting up a Red Book master CD to get to the manufacturer
http://www.roxio.com/enu/support/toast/v8/prof_mastering_features.html

Mixing for Vinyl Tips

Interesting reading from from
http://totalsonic.net/vinyl.htm

* as far as peak levels - remember that digital dBFs does not equal analog dBVU!! The cutting engineer will still need to set the levels that are actually sent to the lathe. In general having your digital masters peak somewhere around -6dBFs is fine as it gives a little headroom and it's possible the cutting engineer won't have to attenuate it as much as if you have it maxed out - but in general as long there are no overs or clipping you can set your digital levels where ever you want them as the cutting engineer will set the levels to the lathe regardless and should be able to easily deal with it.

* center the bass frequencies - if you have things like two different simultaneous bass lines panned left & right or stereo chorusing or flanging effects on the bass it will make it extremely difficult to have your record cut with a hot level because if bass freq's aren't phase coherent the groove will actually become narrower in these parts leading to the potential for a skip.

* tame sibilance - it's a really good idea to run a de-esser on any vocal tracks that have a lot of sibilance. esses and t's can produce a burst of high frequencies which will just distort when played back on vinyl. The solution the cutting engineer can do to make sure this doesn't happen is to just put the whole mix through a de-esser - but it's a lot more transparent if you can take care of this during the mix instead.

* avoid excessive high end! - ultra high frequencies above 15kHz tend to just cause distortion if there is a lot of them and if there are way too much of them will actually smoke the cutting head! Avoid boosting any of the highs above somewhere around 10kHz on your mix. If you are looking to add "presence" or brightness focus your boosts in the upper mid areas somwhere around 2-6kHz.

* don't clip your wave forms! - clipped wave forms with squared tops will often break up really really quick when transferred to vinyl master at a hot level. There's absolutely no reason whatsoever to clip your wav forms on a pre-master destined for vinyl. While it's a popular way to achieve extreme average levels for a CD master it will actually make the cutting engineer cut your record quieter than if you're wav forms have nice natural rounded tops. I've seen lots of people introduce clicks and pops into their master because they clipped their audio way too excessively and didn't notice it because of their crappy monitoring - so I think it's best to completely avoid this problem and make -0.3dbFs your output ceiling.

* go light with the limiter! - while a little peak limiting to tame the big transients can actually be a really helpful for keeping even levels the current squash settings used on a lot of digital masters will actually make things distort more quickly because in overly limited material instead of the peaks on the vinyl master being nice round bottom transients all the upper mids are forced to the top too . Remember dBfs does not translate into dBvu!!! - the levels that go to your vinyl master are actually set by the cutting engineer - so if you're questioning how much limiting or compression to use communicate with the cutting engineer and let them apply what they see fit to do.

* keep it "clean" - any distortion in the digital realm tends to become more noticeable when transferred to vinyl

* sequence thoughtfully - the inner grooves will always be more susceptible to distortion than the outer ones - so it's always a best idea to keep the cuts you want to be the hottest for the 1st or 2nd tracks and have the last track on the side be an instrumental or acapella or quieter passage.

* keep the side lengths realistic. For max level (around +6dbVu) on a 12" "competitive" dance single keep the side length to around 12 minutes max for 33-1/3 and 9 minutes max for 45rpm.

For LP sides I'd say make 26 minutes a side your very maximum unless you want to possibly encounter problems with scuffing and low signal to noise ratio when the records are pressed. With long sides remember that the cutting engineer must make a compromise between bass response and level in order to fit more grooves onto the side - so if you want a really long LP side remember that you'll probably have to sacrifice some of the low end.

* make sure the heads and tails on the tracks in your premaster are clean and have good fades, and unless you want sound in your "spirals" (the wider grooves that are placed between tracks so that dj's can see where the next track is) leave at least 2 seconds between each track. It's also best to leave at least 10 seconds between tracks at the side break or provide the pre-master for each side on seperate discs or reels.

* communicate any requests or questions with the cutting engineer! This I've found is often the key to having you end up really happy. I also recommend getting an acetate or DMM reference disc made prior to having your masters cut so that you can be sure that you are happy with how your master sounds before incurring the expenses for plating and test pressing.

* provide good documentation - make sure you include a track list including track number and side and length of tracks and sides. If you're providing a data disc make sure that the names of your files on the disc match the names you have listed on your track sheet (or just name them something like A1.wav, A2.wav, B1.wav etc.).

Steven Berson
Mastering Engineer
Total Sonic Media

Universal Audio UAD-2 Solo Laptop

So I got the new UAD-2 laptop card. It's the little dsp doodad that goes into the little slot on the side of my laptop. Pretty easy install, just a lot of upgraeydes that take some time at the beginning.

Ok so the free plugins 1176SE, Pultec EQP-1A, CS-1 Channel and Realverb are actually pretty good. The Pultec especially. But I started a mix project and decided to demo just about all of the plugins I would ever use. 1176LN, LA3, Plate 140, the new EMT250, UAD 4k SSL bus comp emulation, Precision Limiter and Multiband Compressor.

Now, I have some decent outboard gear but up til now my plugin library has been total shit. The best most useful one being the L2007 bus limiter. Getting the UAD plugins was more than a step up - it was like discovering fire. So I have little to compare them to, but for their functionality and great sound quality I give them a simultaneous two thumbs up.

My favorites are definitely the Plate 140, 4k Bus comp and 1176LN.

Wednesday, August 19, 2009

Maritime Drive Pedal

New pedal for my friend Daniel. It's a drive/distortion box based on the Red Llama kit. Pretty hack paint job, but spray paint stencils are not my strong point. He's from Nova Scotia, that schooner is the Bluenose. It's getting eaten by a dirty green sea monster.


Gotta say that I was quite a bit happier with my inside organization this time 'round. Not so rats-nesty. Sounds killer!

Thursday, July 30, 2009

Tuesday, July 14, 2009

Psychoacoustics

I found this at http://www.appliedmusic.com/psychoCont.html
reeally interesting!


Psychoacoustics


Psychoacoustics is essentially the study of the perception of sound. This includes how we listen, our psychological responses, and the physiological impact of music and sound on the human nervous system.

In the realm of psychoacoustics, the terms music, sound, frequency, and vibration are interchangeable, because they are different approximations of the same essence. The study of psychoacoustics dissects the listening experience.

Traditionally, psychoacoustics is broadly defined as “pertaining to the perception of sound and the production of speech.” The abundant research that has been done in the field has focused primarily on the exploration of speech and of the psychological effects of music therapy. Currently, however, there is renewed interest in sound as vibration.

An important distinction is the difference between a psychological and a neurological perception. A song or melody associated with childhood, a teenage romance, or some peak emotional experience creates a memory-based psychological reaction. There is also a physiological response to sounds, however. Slightly detuned tones can cause brain waves to speed up or slow down, for instance. Additionally, soundtracks that are filtered and gated (this is a sophisticated engineering process) create a random sonic event. It triggers an active listening response and thus tonifies the auditory mechanism, including the tiny muscles of the middle ear. As a result, sounds are perceived more accurately, and speech and communication skills improve. While a psychological response may occur with filtered and gated sounds, or detuned tones, the primary effect is physiological, or neurological, in nature.

Research on the neurological component of sound is currently attracting many to the field of psychoacoustics. A growing school of thought — based on the teachings of the Dr. Alfred Tomatis — values the examination of both neurological and psychological effects of resonance and frequencies on the human body.

Thanks to the ground breaking findings of Dr. Tomatis (1920-2001), we have come to understand the extraordinary power of the ear. In addition to its critical functions of communication and balance, the ear's primary purpose is to recycle sound and so recharge our inner batteries. According to Tomatis, the ear's first function in utero is to govern the growth of the rest of the physical organism. After birth, sound is to the nervous system what food is to our physical bodies: Food provides nourishment at the cellular level of the organism, and sound feeds us the electrical impulses that charge the neocortex. Indeed, psychoacoustics cannot be described at all without reference to the man known as the “Einstein of the ear.”

In the realm of application-specific music and sound, psychoacoustically-designed soundtracks revolve around the following concepts and techniques:
  • Intentionality (focused application for specific benefit)
  • Resonance (tone)
  • Entrainment (rhythm)
  • Pattern Identification (active listening or passive hearing)
  • Sonic Neurotechnologies (highly specialized sound processing)

Resonance & Entrainment
Consider the following: Anything that moves has a vibration. Though invisible, every aspect of our material world at the atomic level moves constantly. Wherever there is motion, there is frequency. Though inaudible at times, all frequencies make a sound. All sounds resonate and can affect one another. In the spectrum of sound — from the movement of atomic particles to the sensory phenomenon we call music — there is a chain of vibration:
  • All atomic matter vibrates.
  • Frequency is the speed at which matter vibrates.
  • The frequency of vibration creates sound (sometimes inaudible).
  • Sounds can be molded into music.
This chain explains the omnipresence of sound.

Resonance is the single most important concept in understanding the constructive or destructive role of sound in your life. Entrainment, sympathetic vibration, resonant frequencies, and resonant systems all fall under the rubric of resonance. Resonance can be broadly defined as “the impact of one vibration on another.” Literally, it means “to send again, to echo.” To resonate is to “re-sound.” Something external sets something else into motion, or changes its vibratory rate. This can have many different effects — some subtle and some not so.

From iceburgs to airport construction to the human body, soundwaves have the capacity to alter, to actually shift frequency. Simply put, sound is a powerful — yet often ignored — medium for change.

Another fascinating and important aspect of resonance is the process of entrainment. Entrainment, in the context of psychoacoustics, concerns changing the rate of brain waves, breaths, or heartbeats from one speed to another through exposure to external, periodic rhythms.

The most common example of entrainment is tapping your feet to the external rhythm of music. Just try keeping your foot or your head still when you are around fun, up-tempo rhythms. You will see that it is almost an involuntary motor response. However, tapping your feet or bopping your head to external rhythms is just the tip of the iceberg. While your feet might be jitterbugging, your nervous system may be getting a terrible case of the jitters!

Rhythmic entrainment is contagious: If the brain doesn't resonate with a rhythm, neither will the breath or heart rate. In this context, rhythm takes on new meanings. Not only is it entertaining, but rhythmic entrainment is a potent sonic tool as well — be it for motor function or other autonomic processes such as brainwave, heart, and breath rates. Alter one pulse (such as brain waves) with music, and the other major pulses (heart and breath) will dutifully follow.

When it comes to the intentional applications of music, the entrainment effect completes the circle of the chain of vibration: Atomic matter —> vibration —> frequency —> sound —> sympathetic vibration (resonance) —> entrainment.

Music alters the performance of the nervous system primarily because of entrainment. Entrainment is the rhythmic manifestation of resonance. With entrainment, a stronger external pulse does not just activate another pulse but actually causes the latter to move out of its own resonant frequency to match it.

Understanding the interlocking concepts of resonance and entrainment enables us to grasp the way external tone and rhythm can heal or create havoc. Sound affects glass and concrete as well as brain waves, motor response, and organic cells.

Pattern Identification
Simply put, pattern identification is one of the brain’s analytical processes. Identifying a pattern (visual, auditory, odiferous, kinesthetic) enables cerebral attention to shift from active awareness to passive acknowledgement. Listening and looking are active functions; hearing and seeing are passive.

In active listening mode, the middle ear function is highly engaged while the brain seeks to identify a pattern. Once an auditory pattern is found, passive hearing begins. Habituation sets in and the brain focuses on other things. There are specific times when active listening or passive hearing is preferable. Active listening stimulates the nervous system. Passive hearing is neutral or “discharging.”

Sonic Neuro-Technologies
Representing two distinct approaches to therapeutic sound, filtration/gating (F/G) and binaural beat frequencies (BBFs) currently define the growing field of “sonic neurotechnologies.” This phrase was coined by Joshua Leeds to describe the arena of soundwork that depends on the precise mechanical manipulation of soundwaves to bring about desired changes in the psyche and physical body. Two diverse approaches to the processing of sound frequencies hold great interest and are used on some of the audio programs in Sound Remedies.

Filtration/gating (F/G) techniques have been honed in Tomatis clinics worldwide. By gradually gating and filtering out the lower range of music (sometimes up to 8000 Hz), and then adding the frequencies back in, a retraining of the auditory processing system occurs. The effects of filtration and gating are felt on a psychological, neurodevelopmental, and physical level. The application of sound stimulation has been effective in the remediation of many neurodevelopmental issues. Children and adults with learning/attention difficulties, developmental delays, auditory processing problems, sensory integration and perceptual challenges have experienced profound improvement.

Another approach to sound processing is the field of binaural beat frequencies (BBFs). By listening through stereo headphones to slightly detuned tones (i.e., sound frequencies that differ by a prescribed number of Hz), sonic brainwave entrainment takes place. Facilitating a specific range of brainwave states may assist in arenas such as pain reduction, enhanced creativity, or accelerated learning.

These two sonic neurotechnologies — used separately — have roots in neurology, physiology, and psychology. They must be used carefully and wisely. BBF and F/G soundtracks can be powerful tools. Consequently, proper consideration must always be afforded.

Please note: Sound products with BBFs or F/G contribute to health and wellness, but they are never intended to replace medical diagnosis or treatment. Do not drive or operate machinery while listening to sound programs that use these methedologies.

The therapeutic use of sound, like any new tool, requires discipline, education, and strict observance of ethical standards. There is currently no established licensure in the use of sonic neurotechnologies. Therefore the onus of responsibility for handling the changes that occur as a consequence of the application of these methods (most specifically, filtration/gating) falls on the practitioner. Sound is a marvelous adjunct to an existing profession. Therapists and educators will do well in performing due diligence and acquiring proper training.

Sound Stimulation with Filtration/Gating
In the broadest definition, sound stimulation can be defined as the excitement of the nervous system by auditory information. Sound stimulation auditory retraining narrows the focus. In this context, a precise application of electronically processed sound, through headphones, can have the effect of retraining the auditory mechanism to take in a wider spectrum of sound frequencies. An ear that cannot process tone properly is a problem of great magnitude. As discussed in previous chapters, sufficient auditory tonal processing is a prerequisite to normal auditory sequential processing.
  • Auditory tonal processing (ATP) may be defined as the ability to differentiate between the tones utilized in language.
  • Auditory sequential processing (ASP) is the ability to link pieces of auditory information together.

Auditory tonal processing is a basis for more complex levels of auditory sequential processing. ASP is the ability to receive, hold, process, and utilize auditory information using our short-term memory. As the foundation for short-term memory, ASP is one of the building blocks of thinking.

Sequential processing functions are fundamental to speech, language, learning, and other perceptual skills. The ability to interpret sound efficiently provides the neurological foundation for these sequential functions. Per neurodevelopmental specialist Robert J. Doman Jr., “many people who have experienced auditory processing deficits have seen their sequential functions return and/or improve when proper tonal processing is restored.”

The primary sound application used in the remediation of impaired tonal processing was created by Alfred Tomatis. Further discussions cannot take place without absolute acknowledgment of his pioneering research. The current field of sound stimulation auditory retraining evolves from Tomatis's discoveries of the powerful effect of filtration and gating of sound.

In the context of auditory retraining, let's summarize these terms:
  • Filtration means the removal of specific frequencies from an existing sound recording, be that the music of Mozart or a recording of a voice. Through the use of sound processing equipment, it is possible to isolate and mute certain frequency bandwidths. With filtration, any part of the low, mid, or high end of a recording can be withdrawn and reintroduced at will. On a visual level, imagine erasing the bottom part of a picture and then eventually drawing it back in. This is filtration.
  • Gating refers to the creation of a random sonic event. This is accomplished by electronically processing a soundtrack so it unexpectedly jumps between the high and low frequencies. While not always pretty to listen to, the net effect of this sound treatment is an extensive exercising of the muscles of the middle ear. The combined process of filtration and gating creates a powerful auditory workout. And for good reason! The middle ear mechanism must work very hard to translate the complexity of the “treated” incoming sound.

“Psychoacoustics” is a brief excerpt from The Power of Sound, published by Healing Arts Press. © 2001 Joshua Leeds. All rights reserved. Further information about psychoacoustics can be found in The Power of Sound and other fine books at Sound-Remedies.com.

Wednesday, July 8, 2009

Stereo to Mono Cable Hack

Handy little mod to a stereo 1/4" jack to feed an mono speaker like an Avantone Mix Cube






http://koo.corpus.cam.ac.uk/mixerton/articles/monocable/

Monday, June 1, 2009

Drum Overhead Phase Tip


Recording is a never ending adventure of discovery, I think that's why I love it so much. I read and read techniques, tutorials, opinions on recording, mixing, mastering, electronics, etc. and I'm never satisfied. There is no right way to do something, I have to try it all. I have read so many articles that it's rare for me to stumble across something by genuine accident, but I came across a time saving technique that seems worthy of sharing. I never went to recording school so this might be one of those techniques that is totally old news to someone who has... when you're checking the phase of your drum mics, start by flipping the phase of the overheads - it gives you an instant aural picture of what is in and out of phase with each other.

There it is, a simple time saver that I came across by accident. Hope this helps.

Wednesday, May 27, 2009

Urei Cooper Time Cube

I've been fascinated with this weird delay box for a while, maybe someday I will own one. The effect seems pretty limited, but probably really really cool every once in a while.
http://www.uaudio.com/webzine/2009/may/doctors.html


Weird hey? It's basically a tube that audio is put through. Kind of like talking into a garden hose.

A-Designs Pacifica Preamp

One of the most amazing preamps available. I tried the 500 series version, the P1, on snare and clean electric guitar a while ago and I was so impressed that I bought the big daddy, full voltage Pacifica version not long after. Based on the Quad 8 Pacifica console that was discontinued long ago - A Designs upgraded the design with Cinemag input and output transformers. It pretty much lives on overheads and acoustic guitar. Bass is pretty darn rad through this guy as well.

Innards for your diy eyes... (the build quality is stunning).



Thursday, April 23, 2009

Inside some Urei LA4's


I've been having problems with one of my Urei LA4's, low level distorted output. Someday I hope to be knowledgeable enough to test around and isolate the problem, then fix it. For now I am limited to popping the lid and sniffing for burnt out resistors. Yep. Smells funny. Hope it's not the optical element causing the problem.

I'll have to take it in to get fixed. (It's the single one in the picture - the one with the black mains transformer)



Tangible Technologies has some interesting mods available for LA4's
http://www.tangible-technology.com/optical/LA4_article.htm

Also great reading is this article about caps
http://www.tangible-technology.com/audiobasics/upgrades/upgrade1_opamp_cap.htm

Saturday, April 18, 2009

Master Tracks with Moe Berg and Laurence Currie

Interesting show about studio production with Moe Berg and Laurence Currie producing a song in a day. Pretty much all of the bands that I've seen suck, so Tarranno, but it's interesting to see the process nonetheless. Cool to see Metal Works in action. Neve 2254 above the Pultecs. Nice!
...yeah and of course the old U47 is nice too.

http://www.aux.tv/show/Master-Tracks/

Recommended Reading: Alan Blumlein

The Inventor of Stereo - The L!&$@ and #@^rks of Alan Dower Blumlein

Don't be a douche bag. Read this. He's a pretty big deal.

EMI circa 1935

Friday, April 17, 2009

DIY. Ok I get it. I'm hooked!




Right. I thought DIY would help me, save me from spending all of my cash (or credit rather) on brand name high end audio equipment, well, I was dead wrong. Unfortunately the opposite has happened. I'm finding that because I am saving dough by building myself I don't want to cheap out on components - I want the best, usually most expensive innards. And I'm also finding that I can't help myself when it comes to building something new, so I now have multiple incomplete projects that are waiting to be finished. It's a total addiction.

So the next logical step, besides finishing the API project (Bourns pots and front panel), is to gather the funds and order the BOM for the Neve 33609 build that Igor and Purusha put together. A very complicated project for someone with my skillz and it's also really expensive - transformers alone will cost around $500 bucks. So instead, with the help of the very good folks at FaderMaster (www.fadermaster.com) I will be building a variation of a Pultec EQ P1A (http://www.recproaudio.com/diy_pro_audio/pultec_eqp1a.htm) with a solid state output amp based on this schematic...


(http://i74.photobucket.com/albums/i276/velvettone/EQP-1A3Schematic.jpg).
A little crazy, but totally necessary. Right?

...because. Many times I have come to a brick wall using the eq on my 737. It's good and all, but kind of lacking character. A stereo version of Pultec would fill a great big hole in my current setup. Right!

Monday, April 13, 2009

API 312 Finished! Kind of...




Ok, it's been a while. A long while. Since my last post all of the components of the preamps arrived. Opamps, transformers, knobs. At this point it is finished and functioning and any parts that I am waiting for are purely aesthetic additions.

The case

I used my trusty new drill press to cut the holes for the xlr input and output jacks. The first hole I drilled was a 1/16" too big - which doesn't sound like much, but it's pretty gaping when you look at it up close. I did my best to align the xlr jack in the hole centered so you wouldn't be able to tell that it was an oversized hole. Not a half bad job I must say. Bet you can't even tell from the photo.


The power jack looks pretty pro but holy shit, it took some serious hack job man handling. Underneath that plastic jack/cover it looks like hell, but hey. Whatever.

Transformers

Input = Cinemag CM-75101APC

Output = Cinemag CMOQ-2S



Really wasn't sure how to go about mounting the output transformers. The bolts that I bought didn't quite fit through the holes in the pcb so I drilled out the pcb a bit. Turned out ok - no big deal. They mounted fine after that.

The leads were a bit weird. I wasn't sure if they had to be left long or I should cut them short. I decided after looking at several other diy project pictures that cutting them was not a bad idea and that it would keep it neat and tidy. To measure them, I pulled the leads through the holes in the pcb to get the right length, then trimmed and stripped them. And finally I soldered them to the pcb.

The input transformers were easily soldered into place. I used a quarter to space them from the pcb.

Op Amps
John Hardy 990c

The opamps were easy enough. Solder in the pins and seat the op amp.

My First Test!!!!



This was a very exciting day. I got my power supply working and tested! Made sure that everything was taped down to the table so that it wouldn't move around and short something. Oh yeah, and I was extremely careful not to zap my stupid cat (that would learn him he he). Connected everything and plugged it in. Turned the power switch on. Yay, a light! After a quick woot! woot! I continued to test and adjust the trim pots. Both the + and - terminals tested ok and were easily adjusted to 18 volts. Unfortunately I found out that the +48 phantom would not adjust up past 7 volts. Something in the psu is a little messed up. I have a feeling it was one of the regulators getting fried when I soldered it together. The FiveFish psu is a double sided pcb with TIGHT spacing. Next time I will buy a much small tip for my soldering iron before putting one of these bad boys together.

The Big Test!!
So I determined that because the +48 phantom section of the mic pre is isolated from the amp section I could connect the 312 without connecting the +48 phantom terminals to the psu and continue testing.

So here is my set up... test is across +V and ground and -V and ground op amp pins



Success! They work!!

After testing all of the pre amp cards for correct voltage I set up to test for sound. The big test: seating a (not very cheap) 990c in and turning on. I cut the ends off of an old mic cable to plug a mic in.



Flipped the switch.... lights on.... no smoke... no overheating. Great. Plugged in a 58 and tested. Working!! HUGE sigh of relief. Wow, it works. And it sounds amazing! No buzzing, no crackling or anything unusual. And, when the volume is turned to zero. There is NO sound. Very very cool.

Mounting In The Case

Still can't believe that they are working. Amazing!

Now to mount them in a rack case so I can use them in real life situations. Embarassingly it took quite a while to figure out how to mount the pcb's with enough height for the bottom of the transformer not to rub, but not too much that they wouldn't fit in a 1U rack case. The solution: a bold and two nuts. Here's how it looks with the holes drilled and the bolts through...


Not sure if it comes through clearly in the photo, but there are 1 1/4" bolts coming through the bottom of the case then lock washers, a nut and another nut for spacing. It's silly, but I kept thinking that I would need a proper pcb spacer nut for this job and I could not find the right height. Duh. Finally got it with this cheap and easy fix. The only thing (and it might be a good thing) is that the bolts need to be a bit loose to properly seat the preamps in, then tightened.

Here's what the case looks like with the preamp cards seated... beautiful.


I think I took this picture at about 1:30am - not even close to finished, but I had a session recording fast punk rock the next day so I decided to keep going until I was done. Stupid? Sure, don't mind if I do.

I cut 8 lengths of LAZER quality audio cable to connect the ins and outs and set off stiripping the wire. Sheesh, I swear that takes the most time of all. Like freaking hours!


And here we go.



Pretty damn close to finished, just need a front panel to mount the gain pots.

After multiple, like four or five tries, I finally had holes in the right places to peak the buttons through. It looks like total shit, but kind of cool in an uber diy way.This pic was taken at 7:07am. Birds chirping. I guess I pulled an all-nighter.



At about 8am I powered up the preamp for the first time. I got about 2 minutes through testing the first channel when I smelled a funny electrical burning. Oh fuck!! What the hell could it be? Quick! Power down.

It didn't take me longer than a few seconds to figure out that the op amp on channel two was overheating. Unfortunately it got fried. I took it out and tested it in another channel just to confirm. Yep. Done. $60 bucks down the drain.

Daringly (and possibly stupidly) I did an ultra quick test of a working opamp in channel two just to see if it was the channel that was messed up. Yep. Confirmed. The opamp started to heat up, so I powered down and removed it.

So with no phantom power and only 3 of 4 channels working I pressed on to the session for the ultimate test. A full day in the studio tracking drums. I used the 312 on kick, snare and rack tom with great results. More like "holy shit" results! The kick and snare are soo damb punchy.

I'll post audio samples soon.

Wednesday, March 11, 2009

API Knobs

http://classicapi.com/catalog/index.php

Going to have to get some of these for the mic pre.

Friday, January 16, 2009

API 312 Project.

A while ago I bought 4 API 312 PCB kits from a guy on Craigslist, Chris, who had bought them from 3nity at Prodigy Pro. At that point I had done little in the way of electronics research or any real diy projects. A complete NOOB! I needed more mic pre's and I didn't have the money for quality brand name stuff so I set off to buy some project kits of reputably great sounding, fairly easy to build pre's. I kind of jumped in with 4 because I could take advantage of the a 1U case and a single power supply.

So I had the pcb kits (which were very simple to assemble) together in a few hours the day after I bought them. Ok, admittedly I asked Chris a pile of really stupid questions while assembling everything. After a a short time he just kind of stopped replying. Completely understood, heh heh, sorry for hassling you Chris.



That was at the beginning of November. It's now mid January and I'm finally pulling together the last pieces. Since then I've learned a lot about electronics and have answered a lot of the dumb questions on my own. Understanding how to properly power multiple loads with one power supply was a stepping stone. Understanding what makes a preamp sound different from another preamp was another.

Transformers and Op Amps

Instead of trying to accurately reproduce the original API 312 with the exact same transformers and 2520 opamps, I decided to follow 3nity's suggested use of Cinemag input and output transformers (same used in the A-Designs Pacifica which is a giant plus in my books). And after researching which opamp I decided on the John Hardy 990c. There are lots of opamp manufacturers out there that make a 990 DOA based on the original Jensen design that fits in the API 2520 footprint. It was down to the JLM and the Hardy. I ended up choosing (from what I read about them) the cleaner of the two. (There is a great list of 2520 compatible OpAmps at the Eisen Audio site http://www.eisenaudio.com/diy500/tables/opamps/). The Cinemag transformers and Hardy Opamps are in the mail right now. I should receive them any day now.

Voltage and Current Draw

In the mean time I did a bunch of reading on powering the preamps. Besides the +48 dc phantom supply, the opamp is what requires power on the preamp board. Therefore, the opamp defines the voltage required and the minimum current draw. The API 2520 and and all API VPR 500 series stuff requires +/-16 V. To some this is the downside of the 500 series because lower powered pre's supposedly have less headroom.

The Hardy 990c can operate from +/-15 Volts to +/- 24 Volts. I reckon I can test different voltages to see how true this theory of lower volts = lower headroom, but likely I will get it working somewhere in the neighborhood of +/-18 Volts and leave it there.

As John Hardy kindly informed me, the supply current draw of the 990c is 25mA unloaded, therefore the power supply needs to deliver +/-18Volts at 100mA. I was stuck on this question for a while.

The Power Supply

So the voltage and current draw questions had been solved, but what about the mains transformer? How does it play into the mix. I guess it was kind of working backwards because I had sorted out why I need a rectifier, regulator, etc. but the step down voltage from 110 to ? was the question. Actually, that's a lie, I still don't really understand +/- dc voltage. That's baffling.

With important questions left to be answered (questions that might jeopardize my safety when I power up... at least I know what not to do with electronics) I decided to buy a PSU kit from Five Fish Audio. Recommended by 3nity, it is an 18 - 24 volt regulated power supply with a step down transformer. It even has 4 separate outputs for 4 preamps. Pretty simple-stupid really.... awesome! Just right for a noob tech like me.

The package from Five Fish arrived yesterday so I quit talking to my girlfriend for the evening and got to work. Here's how it went...





The kit laid out. Construction begins...




Dammit! What?




Ok, finished. I was going to test the PSU but decided to wait 'cause it was getting late.

Laid it all out in case with incomplete 312 boards instead.


And... couldn't help myself, I had to start drilling the blank front panel.



2:30am, that's it for now.